Galvanized coil, the thin steel sheet is immersed in a molten zinc tank to make a layer of zinc thin steel sheet adhered to its surface.
It is mainly produced by continuous galvanizing process, that is, the rolled steel sheet is continuously immersed in a plating tank with molten zinc to make a galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also made by hot dip method, but after leaving the tank, it is immediately heated to about 500℃ to form an alloy film of zinc and iron. This galvanized coil has good coating adhesion and weldability.

stainless steel plate is one of the most popular steel plates across the globe for a mix of its favorable characteristics. stainless steel is mainly composed of iron, chromium and nickel. This combination leads to outstanding oxidation resistance and corrosion resistance of stainless steel plates. The stainless steel plate has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. Due to its good versatility and relatively low cost, stainless steel plate is widely used in food processing equipment, building materials, automobile parts and other fields.

Metal extrusion is the manufacturing process of choice when producing high volumes of material with a constant cross-section. With the extrusion process, metal material is forced through the shaped opening of a die using high pressure, resulting in an extruded profile. These profiles range from simple shapes like round or rectangular tubes, U- or H-channels, or more complex profiles with multiple internal hollows and external features, such as 80/20 and T-slot framing bar. Extrusion is also standard for wall and window trim as a cosmetic and structural framing component. The raw material typically comes in billet form, which is heated and placed into part of the extrusion press called the container. A die stack sits on the other end of the container, forming the opening, which shapes the material to the desired shape using direct or indirect extrusion methods. The extrusion is then quenched, straightened, sawed to the specified length, and inspected for dimensional consistency and accuracy. Extruded products can easily be post-processed to add features outside the channeled profile.

Hot-rolled steel coil products have excellent properties such as high strength, good toughness, easy processing and good weldability, and are widely used in manufacturing industries such as steel, construction, machinery, boilers, and pressure vessels.

Thickness: 0.15-600mm
Standard: GB, JIS, DIN, ASTM
Width: ≦2600mm
Temper: O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETC
Length: ≦16000mm or Coil (C)
Type: sheet/ plate/coil/roll
Aluminum Grade: 1000 Series: Industrial Pure Aluminum(1050,1050A,1060,1070,1100,); 2000 Series: Aluminum-copper alloys(2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17); 3000 Series: Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105); 4000 Series: Al-Si alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A); 5000 Series: Al-Mg alloys(5052, 5083,5454, 5754, 5005, 5086,5182, 5A05 5A06); 6000 Series: Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02); 7000 Series: Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05)

Thickness: 0.15-600mm
Standard: GB, JIS, DIN, ASTM
Width: ≦2600mm
Temper: O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETC
Length: ≦16000mm or Coil (C)
Type: sheet/ plate/coil/roll
Aluminum Grade: 1000 Series: Industrial Pure Aluminum(1050,1050A,1060,1070,1100,); 2000 Series: Aluminum-copper alloys(2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17); 3000 Series: Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105); 4000 Series: Al-Si alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A); 5000 Series: Al-Mg alloys(5052, 5083,5454, 5754, 5005, 5086,5182, 5A05 5A06); 6000 Series: Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02); 7000 Series: Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05)

Alloy Series: 1/2/3/5/6/7/8xxx series
Thickness: 0.15~6.00mm
Coil Inside Diameter: 500 ~ 1,550 mm
Width: 9 ~ 2,600 mm(Standard Size:914mm,1000mm,1200mm,1219mm,1250mm,1500mm)
Weight: 3-8 tons per coil or as request
Technique: Cold Rolled ,Hot rolled
Forms: Coils, Rolls,Strips, Perforated Steel Coils, Checkered Steel Coils.
MOQ: 5MT per size, total 20MT for one order
Quality of Material: Totally free from defects like white rust,roll marks,edge damage,camber,dents,holes,break lines,scratches and free from coil set.
Customized Service : OEM and ODM
Certification: ISO9001, SGS, BV,CE,SGS

Alloy Series: 1/2/3/5/6/7/8xxx series
Thickness: 0.15~6.00mm
Coil Inside Diameter: 500 ~ 1,550 mm
Width: 9 ~ 2,600 mm(Standard Size:914mm,1000mm,1200mm,1219mm,1250mm,1500mm)
Weight: 3-8 tons per coil or as request
Technique: Cold Rolled ,Hot rolled
Forms: Coils, Rolls,Strips, Perforated Steel Coils, Checkered Steel Coils.
MOQ: 5MT per size, total 20MT for one order
Quality of Material: Totally free from defects like white rust,roll marks,edge damage,camber,dents,holes,break lines,scratches and free from coil set.
Customized Service : OEM and ODM
Certification: ISO9001, SGS, BV,CE,SGS

Material ：BS4449, Gr460B,Gr500B, GB1449.2, HRB335, HRB400, HRB500,HRB400E,HRB500E, ASTM A615, GR40/GR60/GR75, JIS G3112,SD390,SD360 KoreaStandarsKS D 3504 SD400 SD500 SD600, AustralasianStandard GR500N
Size：6mm,8mm,10mm, 12mm, 13mm, 14mm, 16mm, 20mm, 22mm, 25mm, 30mm, 32mm, 40mm,50mm
Length： 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques
Standard: BS4449-2005,GB1449.2-2007,JIS G3112-2004, ASTM A615-A615M-04a,Korea StandarsKS D 3504, AustralasianStandard AS/NZS 4671
Grade: Grade A, Grade B, Grade C
Section Shape ： Spiral Shape,Herringbone Shape,Crescent Shape
Technique: Steel Rebar Iron Rod
Packing :Bundle, or with all kinds of colors PVC or as your requirements Ends Plain end/Beveled,protected by plastic caps on both ends, cut quare,grooved,threaded and coupling,etc.