Metal extrusion is the manufacturing process of choice when producing high volumes of material with a constant cross-section. With the extrusion process, metal material is forced through the shaped opening of a die using high pressure, resulting in an extruded profile. These profiles range from simple shapes like round or rectangular tubes, U- or H-channels, or more complex profiles with multiple internal hollows and external features, such as 80/20 and T-slot framing bar. Extrusion is also standard for wall and window trim as a cosmetic and structural framing component. The raw material typically comes in billet form, which is heated and placed into part of the extrusion press called the container. A die stack sits on the other end of the container, forming the opening, which shapes the material to the desired shape using direct or indirect extrusion methods. The extrusion is then quenched, straightened, sawed to the specified length, and inspected for dimensional consistency and accuracy. Extruded products can easily be post-processed to add features outside the channeled profile.

Thickness: 0.15-600mm
Standard: GB, JIS, DIN, ASTM
Width: ≦2600mm
Temper: O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETC
Length: ≦16000mm or Coil (C)
Type: sheet/ plate/coil/roll
Aluminum Grade: 1000 Series: Industrial Pure Aluminum(1050,1050A,1060,1070,1100,); 2000 Series: Aluminum-copper alloys(2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17); 3000 Series: Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105); 4000 Series: Al-Si alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A); 5000 Series: Al-Mg alloys(5052, 5083,5454, 5754, 5005, 5086,5182, 5A05 5A06); 6000 Series: Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02); 7000 Series: Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05)

Thickness: 0.15-600mm
Standard: GB, JIS, DIN, ASTM
Width: ≦2600mm
Temper: O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34/H16/H26/H36 H18/H28/H38 H114/H194, etc.F, T1 T2 T4 T5 T6 T51 T54 T651 T652 T6510 T62 T6511 ETC
Length: ≦16000mm or Coil (C)
Type: sheet/ plate/coil/roll
Aluminum Grade: 1000 Series: Industrial Pure Aluminum(1050,1050A,1060,1070,1100,); 2000 Series: Aluminum-copper alloys(2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17); 3000 Series: Aluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105); 4000 Series: Al-Si alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A); 5000 Series: Al-Mg alloys(5052, 5083,5454, 5754, 5005, 5086,5182, 5A05 5A06); 6000 Series: Aluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02); 7000 Series: Aluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05)

Alloy Series: 1/2/3/5/6/7/8xxx series
Thickness: 0.15~6.00mm
Coil Inside Diameter: 500 ~ 1,550 mm
Width: 9 ~ 2,600 mm(Standard Size:914mm,1000mm,1200mm,1219mm,1250mm,1500mm)
Weight: 3-8 tons per coil or as request
Technique: Cold Rolled ,Hot rolled
Forms: Coils, Rolls,Strips, Perforated Steel Coils, Checkered Steel Coils.
MOQ: 5MT per size, total 20MT for one order
Quality of Material: Totally free from defects like white rust,roll marks,edge damage,camber,dents,holes,break lines,scratches and free from coil set.
Customized Service : OEM and ODM
Certification: ISO9001, SGS, BV,CE,SGS

Alloy Series: 1/2/3/5/6/7/8xxx series
Thickness: 0.15~6.00mm
Coil Inside Diameter: 500 ~ 1,550 mm
Width: 9 ~ 2,600 mm(Standard Size:914mm,1000mm,1200mm,1219mm,1250mm,1500mm)
Weight: 3-8 tons per coil or as request
Technique: Cold Rolled ,Hot rolled
Forms: Coils, Rolls,Strips, Perforated Steel Coils, Checkered Steel Coils.
MOQ: 5MT per size, total 20MT for one order
Quality of Material: Totally free from defects like white rust,roll marks,edge damage,camber,dents,holes,break lines,scratches and free from coil set.
Customized Service : OEM and ODM
Certification: ISO9001, SGS, BV,CE,SGS

Metal extrusion is the manufacturing process of choice when producing high volumes of material with a constant cross-section. With the extrusion process, metal material is forced through the shaped opening of a die using high pressure, resulting in an extruded profile. These profiles range from simple shapes like round or rectangular tubes, U- or H-channels, or more complex profiles with multiple internal hollows and external features, such as 80/20 and T-slot framing bar. Extrusion is also standard for wall and window trim as a cosmetic and structural framing component. The raw material typically comes in billet form, which is heated and placed into part of the extrusion press called the container. A die stack sits on the other end of the container, forming the opening, which shapes the material to the desired shape using direct or indirect extrusion methods. The extrusion is then quenched, straightened, sawed to the specified length, and inspected for dimensional consistency and accuracy. Extruded products can easily be post-processed to add features outside the channeled profile.

Metal extrusion is the manufacturing process of choice when producing high volumes of material with a constant cross-section. With the extrusion process, metal material is forced through the shaped opening of a die using high pressure, resulting in an extruded profile. These profiles range from simple shapes like round or rectangular tubes, U- or H-channels, or more complex profiles with multiple internal hollows and external features, such as 80/20 and T-slot framing bar. Extrusion is also standard for wall and window trim as a cosmetic and structural framing component. The raw material typically comes in billet form, which is heated and placed into part of the extrusion press called the container. A die stack sits on the other end of the container, forming the opening, which shapes the material to the desired shape using direct or indirect extrusion methods. The extrusion is then quenched, straightened, sawed to the specified length, and inspected for dimensional consistency and accuracy. Extruded products can easily be post-processed to add features outside the channeled profile.

Metal extrusion is the manufacturing process of choice when producing high volumes of material with a constant cross-section. With the extrusion process, metal material is forced through the shaped opening of a die using high pressure, resulting in an extruded profile. These profiles range from simple shapes like round or rectangular tubes, U- or H-channels, or more complex profiles with multiple internal hollows and external features, such as 80/20 and T-slot framing bar. Extrusion is also standard for wall and window trim as a cosmetic and structural framing component. The raw material typically comes in billet form, which is heated and placed into part of the extrusion press called the container. A die stack sits on the other end of the container, forming the opening, which shapes the material to the desired shape using direct or indirect extrusion methods. The extrusion is then quenched, straightened, sawed to the specified length, and inspected for dimensional consistency and accuracy. Extruded products can easily be post-processed to add features outside the channeled profile.

Metal extrusion is the manufacturing process of choice when producing high volumes of material with a constant cross-section. With the extrusion process, metal material is forced through the shaped opening of a die using high pressure, resulting in an extruded profile. These profiles range from simple shapes like round or rectangular tubes, U- or H-channels, or more complex profiles with multiple internal hollows and external features, such as 80/20 and T-slot framing bar.