​Standard ：ASTM EN DIN GB ISO JIS BA ANSI
Steel Grade： Q195, Q215,Q235,Q345,ST37, A36,45# ,16Mn, SPHC,SGCC,CGCC
Thickness：0.2-100mm or Customized
Width ：1250-2500mm,or as Your Request ( regular width 1000mm, 1250mm, 1500mm )
Coil ID ：508mm or 610mm
Coil Weight ：3 - 8 ton or as Your Request
Technique： Hot rolled cold rolled as Your Request
Surface ：Treatment Bare,Black,Oiled,Shot Blasted,Spray Paint,Coated,Galvanized,or as Your Request
Package ：Standard Export packing(Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet)

​Standard ：ASTM EN DIN GB ISO JIS BA ANSI
Steel Grade： Q195, Q215,Q235,Q345,ST37, A36,45# ,16Mn, SPHC,SGCC,CGCC
Thickness：0.2-100mm or Customized
Width ：1250-2500mm,or as Your Request ( regular width 1000mm, 1250mm, 1500mm )
Coil ID ：508mm or 610mm
Coil Weight ：3 - 8 ton or as Your Request
Technique： Hot rolled cold rolled as Your Request
Surface ：Treatment Bare,Black,Oiled,Shot Blasted,Spray Paint,Coated,Galvanized,or as Your Request
Package ：Standard Export packing(Plastic film in the first layer,second layer is Kraft paper. Third layer is galvanized sheet)

Steel sheet piles are long structural sections with a vertical interlocking system that create a continuous wall. The walls are often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall to the soil in front of the wall.

Steel sheet piles are long structural sections with a vertical interlocking system that create a continuous wall. The walls are often used to retain either soil or water. The ability of a sheet pile section to perform is dependent upon its geometry and the soils it is driven into. The pile transfers pressure from the high side of the wall to the soil in front of the wall.

Certification : CE, ISO, SGS，BV，Mill Certificate
Standard : ASTM，JIS，GB，DIN，EN
Design Style : Customizable
Delivery Time : 7-10Days

Payment Type: T/T,L/C,D/P,Money Gram,Western Union
Incoterm: FOB,CFR,CIF,EXW
Transportation:Ocean,Land,Express
Port: Qingdao,Tianjin,Shanghai
Option:
14*4
21*4
25*3
38*4
219*32
273*18

I-beam is mainly divided into ordinary I-beam, light I-beam and low alloy light I-beam. Ordinary I-beam and light I-beam flanges are thick on the web plate and thin on the outside. Ordinary I-beam, light I-beam, because the cross-sectional dimensions are relatively high, narrow, so the section of the two main sleeve moment of inertia difference is large, which makes it in the scope of application has a great limitation. The use of I-beam shall be selected according to the requirements of the design drawings.

H-beam is a new type of steel for economic construction. H-beam has economical and reasonable cross-sectional shape, good mechanical properties, uniform extension of each point on the cross-section and small internal stress during rolling. Compared with ordinary I-beam, H-beam has the advantages of large cross-sectional modulus, light weight and metal saving, which can reduce the building structure by 30-40%. In addition, because its legs are parallel to the inner and outer sides and the leg ends are right angles, the welding and riveting work can be saved by 25%. It is often

The hex bars have good machinability,mechanical features and close dimensional precision as it is rolled steel.Hex bar is typically employed in heat exchangers, chemical equipment,aerospace parts,tanks and marine equipment,among its many uses.They are used in various industrial and commercial requirements and are supplied worldwide